Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
SGSN APN Policy Configuration Mode Commands
direct-tunnel ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
direct-tunnel
This command defines the permission for direct tunnel establishment by GGSNs resolved by this APN.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Removes the configured policy of not to permit direct tunnel by GGSNs resolved by this APN.
Default: Disabled.
Specifies that a direct tunnel is not permitted by the GGSN resolved by this APN.
Specifies that a direct tunnel is not permitted by the GGSN resolved by this APN.
Usage
Use this command to enable/disable the permission for establishment of direct tunnels between RNC and
GGSN.
GGSN.
Example
The following command configures the SGSN not to permit the direct tunnel with the GGSN which is resolved by this
APN policy:
The following command configures the SGSN not to permit the direct tunnel with the GGSN which is resolved by this
APN policy: