Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
SGSN Operator Policy Configuration Mode Commands
wildcard-apn ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
wildcard-apn
Define the APN to be used in case a wildcard APN is included in the subscriber record.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Removes the wildcard-apn definition from the configuration.
can be one of the following options:
- for an ipv4 context
- for an ipv6 context
- for a PPP context
: Must be one of the APN network Ids defined with the
command in this SGSN operator
policy configuration mode.
: Enter a string of 1 to 62 alphanumeric characters, including dots (.) and dashes (-), to define
the network identifier. For releases 8.0 the maximum number of characters is 63; for releases 8.1 and higher,
the maximum number of characters is 62.
the maximum number of characters is 62.
Usage
This command is used to define a wildcard APN with the type of PDP context and the APN‘s network ID. This wildcard
APN would be used when an APN is not identified.
APN would be used when an APN is not identified.
Example
Use this command to create an APN wildcard:
Use this command to create an APN wildcard: