Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
SGTP Service Configuration Mode Commands
▀ gtpc
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
gtpc
Configure the GPRS Tunneling Protocol Control (GTP-C) settings for the SGTP service.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Disables the configured GTPC setting.
Resets the specified parameter to its default value.
Binds SGTP service to the IP address of the interface. Enter a standard dotted-quad IPv4 address.
The bind address for the
The bind address for the
and
commands should be the same.
Enter a string of 1 to 79 alphanumeric characters to identify the context name.
Default: 60
must be an integer from 0 through 3600. Configures the duration between echos.
Default: 100
Configures the interval (in seconds) for which the SGTP maintains responses sent to SGSN. This optimizes
the handling of retransmitted messages. This value should be configured to be greater than the SGSN's
configuration for max-retries multiple by retry-interval.
Configures the interval (in seconds) for which the SGTP maintains responses sent to SGSN. This optimizes
the handling of retransmitted messages. This value should be configured to be greater than the SGSN's
configuration for max-retries multiple by retry-interval.
: Must be an integer from 10 to 3600.