Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
SSH Configuration Mode Commands
▀ subsystem
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
subsystem
Configures the system to perform file transfers using secure ftp (sftp) over ssh v2. Administrator users must be
configured with the ftp attribute privilege to issue this command.
configured with the ftp attribute privilege to issue this command.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Disables either the sftp ssh file transfer method or disables access to the CLI over ssh.
Default: Enabled
Configures the SSH system for the current context to allow access to the CLI.
Configures the SSH system for the current context to allow access to the CLI.
Default: Disabled
Enables the SSH system for the current context to perform file transfers using secure ftp (sftp) over ssh v2.
Enables the SSH system for the current context to perform file transfers using secure ftp (sftp) over ssh v2.
Usage
Use this command to enable or disable file transfers using secure ftp over an ssh v2 tunnel.
Also use this command to enable or disable access to the CLI over an SSH connection.
Also use this command to enable or disable access to the CLI over an SSH connection.
Example
The following command enables SFTP for the current context:
The following command enables SFTP for the current context:
The following command disables access to the CLI through an SSH session for the current context: