Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Command Line Interface Overview
CLI Administrative Users ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
Attribute
Value
Framed
2
Administrative (Administrator)
6
NAS_Prompt
7
Authenticate_Only
8
Authorize_Only
17
Inspector
19650516
Security_Admin
19660618
RADIUS Privileges
There are four RADIUS privilege roles. The following table shows the relationship between the privilege roles in the
CLI configuration and RADIUS Service-Type.
CLI configuration and RADIUS Service-Type.
Table 2. CLI Privilege Roles and RADIUS Service Types
CLI Configuration Parameter
RADIUS Service Type
Show Admin Type
administrator
Security_Admin (19660618)
admin
config_administrator
Administrative (6)
cfgadm
operator
NAS_Prompt (7)
oper
inspector
Inspector (19650516)
inspect
Administrative User Privileges
Regardless of the administrative user type, the system supports four user privilege levels:
Inspector: Inspectors are limited to a small number of read-only Exec Mode commands. The bulk of these are
show commands for viewing a variety of statistics and conditions. The Inspector cannot execute show
configuration commands and does not have the privilege to enter the Config Mode.
configuration commands and does not have the privilege to enter the Config Mode.
Operator: Operators have read-only privileges to a larger subset of the Exec Mode commands. They can
execute all commands that are part of the inspector mode, plus some system monitoring, statistic, and fault
management functions. Operators do not have the ability to enter the Config Mode.
management functions. Operators do not have the ability to enter the Config Mode.
Administrator: Administrators have read-write privileges and can execute any command in the CLI except for a
few security-related commands that can only be configured by Security Administrators. Administrators can
configure or modify system settings and can execute all system commands, including those available to the
Operators and Inspectors.
configure or modify system settings and can execute all system commands, including those available to the
Operators and Inspectors.