Cisco Cisco Packet Data Interworking Function (PDIF) Guida Alla Risoluzione Dei Problemi
ASN QoS Descriptor Configuration Mode Commands
▀ schedule-type
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
Configures the data delivery service type to Real-Time Variable Rate (RT-VR) service for a specific ASN
GW service.
GW service.
Configures the data delivery service type to Unsolicited Grant Service (UGS) for a specific ASN GW service.
Specifies the maximum sustained traffic rate in bits per second, reserved for a service flow.
For
For
, specify an integer between 0 and 65535. Maximum latency set to zero means no commitment
is available for this service flow.
Specifies the maximum interval in milliseconds between the receipt of a packet to a BS or an SS on its
network interface/Convergence Sublayer (CS), and the arrival of a packet to its RF interface or the peer
device. This value represents a service commitment.
For
network interface/Convergence Sublayer (CS), and the arrival of a packet to its RF interface or the peer
device. This value represents a service commitment.
For
, specify an integer between 0 and 65535. Maximum latency set to zero means no commitment
is available for this service flow.
Default: 0 (disabled)
Specifies the minimum traffic rates in bits per second, reserved for a service flow.
Specifies the minimum traffic rates in bits per second, reserved for a service flow.
must be an integer between 0 and 65535. A minimum reserved traffic rate set
to zero means no minimum traffic rate reservation is required for this service flow.
Configures the maximum sustained traffic rate in bits per second for traffic schedule.
must be an integer between 1 and 65535.
Default: 0 (disabled)
Specifies the maximum burst size in bits that must be maintained for the service.
For
Specifies the maximum burst size in bits that must be maintained for the service.
For
, specify an integer between 0 and 65535. A maximum traffic burst set to zero means no
maximum traffic burst reservation is required for this service flow.
Default: 49
Specifies the length of the Service Data Unit (SDU) in bytes for a fixed-length SDU service flow.
Specifies the length of the Service Data Unit (SDU) in bytes for a fixed-length SDU service flow.
must be an integer between 1 and 65535.
Important:
Use this parameter only if packing is on and the service flow is carrying fixed-length SDUs.
Specifies the maximum delay variation (jitter) allowed for the connection.
must be an integer between 1 and 65535.