Cisco Cisco Packet Data Interworking Function (PDIF) Manuale Di Manutenzione
RADIUS Server State Behavior
Understanding RADIUS Server States and Commands ▀
Cisco ASR 5000 Series AAA Interface Administration and Reference ▄
OL-23000-01
: Configures maximum number of times the system attempts to retry communication with a
RADIUS server. Once exceeded, the system changes the state of the server to ―Not Responding‖, increments
the
the
counter (if configured), and attempts to
communicate with another RADIUS server. The default value for this parameter is 5.
: Configures the maximum number of times the system transmits authentication
requests to a server before it fails the authentication due to lack of response. The absolute maximum number of
transmissions is equal to NS * (N + 1), where NS is the number of configured authentication servers, and N is
the setting for
transmissions is equal to NS * (N + 1), where NS is the number of configured authentication servers, and N is
the setting for
. The default for this command is disabled.
: Specifies how many seconds the system waits for a response from a RADIUS server before re-
transmitting the request.
More information regarding each command can be found in the Command Line Interface Reference.
The following figure shows a simple flow of events and how the system reacts based on configured parameters.