Cisco Cisco Packet Data Gateway (PDG) Manuale Di Manutenzione
Configuration Management
Generally Available 06-30-2010
3-30
ip dst-address
This command defines a rule definition to analyze and charge user traffic based on IP
destination address. This command now accepts IPv6 addresses.
destination address. This command now accepts IPv6 addresses.
CLI (Ruledef Configuration Mode)
[ no ] ip dst-address { operator { ip_address | ip_address/mask } | { !range
| range } host-pool host_pool }
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
ip protocol
This command configures the IP protocol setting for a packet filter. The
range
keyword
option to select a range of protocols is now obsoleted.
CLI (Packet Filter Configuration Mode)
ip protocol = protocol_number
no ip protocol
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
ip protocol
This command defines a rule definition to analyze and charge user traffic based on the
protocol being transported by IP packets. This command now accepts
protocol being transported by IP packets. This command now accepts
icmpv6
protocol
option.
CLI (Ruledef Configuration Mode)
[ no ] ip protocol operator { protocol_assignment | ah | esp | gre | icmp |
icmpv6 | tcp | udp }
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
ip remote-address
This command configures IP remote address setting for a packet filter. The
range
keyword
option to select a range of IP addresses is now obsoleted.
CLI (Packet Filter Configuration Mode)
ip remote-address = { ip_address | ip_address/mask }
no ip remote-address
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.