Cisco Cisco Packet Data Gateway (PDG) Manuale Di Manutenzione
Generally Available 06-30-2010
SGSN Features in Release 9.0
1-37
New CLI commands have been added to the RNC configuration mode to govern the
inclusion of the Signaling Indication IE in RANAP messages. Refer to the Command Line
Interface Reference for information on enabling/disabling this feature.
inclusion of the Signaling Indication IE in RANAP messages. Refer to the Command Line
Interface Reference for information on enabling/disabling this feature.
Limiting Iu Connections in RANAP Messages
A new command has been created to enable the operator to further control message length
by configuring the number of
by configuring the number of
IuConIDs
sent in each SGSN Init Reset Resource message.
This change will have no impact on current or future configurations as the previously coded
system value was 250.
system value was 250.
Refer to the RNC Configuration Mode chapter of the Command Line Interface Reference for
additional information.
additional information.
Limits / Engineering Rules
The following limits for release 9.0 have been modified in the Engineer Rules appendix of
the SGSN Administration Guide.
the SGSN Administration Guide.
●
2G Interface Rules:
●
Maximum number of NSEs has increased from 256 to 512
●
Maximum number of NSEs controlling the same RA has increased from 64 to 128
●
Connection Rules:
●
Max # of logically connected GGSNs per Gn/Gp intf increased from 20,000 to “no
limit”
limit”
●
Max # of packets buffered -- rules have been clarified:
- Minimum of 2KB/subscriber.
- Maximum of 10KB/subscriber -- if buffers are available in the shared pool*.
(*SGSN provides a buffer pool of 10M per session manager - buffer to be shared by
all subscribers “belonging” to that session manager.)
- Minimum of 2KB/subscriber.
- Maximum of 10KB/subscriber -- if buffers are available in the shared pool*.
(*SGSN provides a buffer pool of 10M per session manager - buffer to be shared by
all subscribers “belonging” to that session manager.)
●
SIGTRAN: Max number of peer servers per SS7RD increased from 144 to 256.
Correction:
●
Max# of RNCs per 3G intf: corrected from 1024 to 256.
Lawful Intercept
The SGSN now supports Phase 1 LI Buffering. For details, please contact your customer
sales or support representative.
sales or support representative.