Cisco Cisco Packet Data Gateway (PDG) Manuale Di Manutenzione

Generally Available 06-30-2010

New Configuration Commands

3-11

Firewall Commands - New in Release 9.0

This section provides information on new commands available in Release 9.0.

firewall icmp-checksum-error

This command configures Stateful Firewall action on packets with ICMP Checksum errors.

CLI (Firewall-and-NAT Policy Configuration Mode)

firewall icmp-checksum-error { drop | permit }

default firewall icmp-checksum-error

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

firewall icmp-fsm

This command enables/disables Stateful Firewall’s ICMP Finite State Machine (FSM).

CLI (Firewall-and-NAT Policy Configuration Mode)

[ default | no ] firewall icmp-fsm

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

firewall ip-reassembly-failure

This command configures Stateful Firewall action on packets involved in IP Reassembly
Failure scenarios.

CLI (Firewall-and-NAT Policy Configuration Mode)

firewall ip-reassembly-failure { drop | permit }

default firewall ip-reassembly-failure

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

firewall malformed-packets

This command configures Stateful Firewall action on malformed packets.

CLI (Firewall-and-NAT Policy Configuration Mode)

firewall malformed-packets { drop | permit }

default firewall malformed-packets

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.