Cisco Cisco Packet Data Gateway (PDG) Manuale Di Manutenzione
Generally Available 06-30-2010
New Configuration Commands
3-61
gtp send
This command configures which information this operator policy specifies for sending in a
GTP message. This command includes the following send options:
GTP message. This command includes the following send options:
●
RAT
●
ULI
●
IMEISV
●
MS-timezone
CLI (SGSN Operator Policy Configuration Mode)
[ no | remove ] gtp send send_option
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
iu-recovery
This command enables the IU recovery function to be used whenever sessions are
recovered.
recovered.
CLI (IuPS Service Configuration Mode)
[ no ] iu-recovery
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
llc
This command configures the timers that control the data flow for the logical link control
(LLC) sub-layer for the GPRS service.
(LLC) sub-layer for the GPRS service.
CLI (GPRS Service Configuration Mode)
llc { T200-sapi1-timeout time | T200-sapi11-timeout time |
T200-sapi3-timeout time | T200-sapi5-timeout time | T200-sapi7-timeout time
| T200-sapi9-timeout time } +
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
mtp2-lssu-len
This command sets the length of the link status signal unit (LSSU) which carries link status
information used to manage link alignment and indicate the status of the signaling points to
each other.
information used to manage link alignment and indicate the status of the signaling points to
each other.
CLI (Link Configuration Mode)
mtp2-lssu-len #_octets
default mtp2-lssu-len
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.