Cisco Cisco Packet Data Gateway (PDG) Manuale Di Manutenzione

Configuration Management

Generally Available 06-30-2010

3-74

signalling-indication-ie { rab-assignment-request [ relocation-request ]

| relocation-request [ rab-assignment-request ] } }

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

ranap

This command enables or disables the inclusion of the Signalling Indication IEs in various
RANAP messages depending upon circumstances.

CLI (RNC Service Configuration Mode)

ranap { signalling-indication-ie { rab-assignment-request [

relocation-request ] | relocation-request [ rab-assignment-request ] }

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

reset-resource

This command enables the operator to control message length by configuring the number of
IuConIDs sent in each RANAP Reset Resource message.

CLI (DNS Client Configuration Mode)

[ default ] reset-resource max-iuconid-per-msg <number>

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

routing-context

This command sets the routing context instructions included in the M3UA messages.

CLI (SGSN PSP Configuration Mode)

routing-context { discard-inbound | process-inbound } { insert-outbound |

suppress-outbound }

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

sgsn-number

This command defines the SGSN’s E.164 number to associate with the Gs Service.

CLI (Gs Service Configuration Mode)

sgsn-number <E.164_number>

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.