Cisco Cisco Packet Data Gateway (PDG) Manuale Di Manutenzione

Generally Available    06-30-2010

Modified Configuration Commands

3-121

This functionality is not supported at this time on the Web Element Manager.

This command determines whether the GGSN retries sending a DRT request after receiving 
an error response message.

This functionality is not supported at this time on the Web Element Manager.

This command check points current GTPP accounting messages and identifies which types 
of interim CDRs are to be generated and sent to the external charging/storage servers (e.g., a 
CFG or a GSS). The impact of this command is immediate. Two new keywords have been 
added to assist with fine tuning the GTPP messages: 

 and 

.

gtpp interim now [ active-charging egcdr | apn apn_name | callid call_id | 

cdr-types { mcdr | scdr } | dhcp-server ip_address | gprs-service svc_name 

| ggsn-service svc_name | imsi imsi [ ip-address sub_address [ username 

name ] now | nsapi nsapi [ ip-address sub-address [ username name ] | 

username name ] ] | ip-address sub_address [ username name ] | ip-pool 

pool_name | mcc mcc_number mnc mnc_number | msisdn msisdn_num | 

sgsn-address ip_address | sgsn-service svc_name | username name ] +

This functionality is not supported at this time on the Web Element Manager.

TP PR 4360 ST16 PR 70569

The 

 keyword was added to the syntax.

 

number [ wait-time seconds ]

This functionality is not supported at this time on the Web Element Manager.