Cisco Cisco Packet Data Gateway (PDG) Manuale Di Manutenzione
Performance Management
Generally Available 06-30-2010
5-50
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
show active-charging flows full
This command displays active charging flows in a system or service. The output of this
command includes the following new fields:
command includes the following new fields:
●
MS NAT IP: The NAT IP address used by the subscriber flow.
●
TCP MS NAT Port: The NAT port number used by the subscriber flow. This field is not
displayed for one-to-one NAT.
displayed for one-to-one NAT.
CLI (Exec Mode)
show active-charging flows { all | [ connected-time [ < | > | greater-than
| less-than ] seconds ] [ flow-id flow_id ] [ full ] [ idle-time [ < | > |
greater-than | less-than ] seconds ] [ ip-address [ server | subscriber ]
[ < | > | IPv4 | greater-than | less-than ] address ] [ port-number [ server
| subscriber ] [ < | > | IPv4 | greater-than | less-than ] number ] [
rx-bytes [ < | > | greater-than | less-than ] number ] [ rx-packets [ < | >
| greater-than | less-than ] number ] [ session-id session_id ] [ summary ]
[ trans-proto { icmp | tcp | udp } ] [ tx-bytes [ < | > | greater-than |
less-than ] number ] [ tx-packets [ < | > | greater-than | less-than ]
number ] [ type flow_type ] } [ | { grep grep_options | more } ]
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
show active-charging rulebase name
The output of this command includes the following new fields:
●
Flow Any Error Charging Action: Indicates the charging action configured for action on
packets dropped by Firewall due to any error. If disabled, no accounting is performed on
such packets.
packets dropped by Firewall due to any error. If disabled, no accounting is performed on
such packets.
●
Type: Indicates the Firewall rule definition type.
●
Firewall Configuration:
●
Dos-Protection:
●
Source-Route: Indicates status of protection against IP Source Route IP Option
attacks.
attacks.
●
Win-Nuke: Indicates status of protection against Win Nuke attacks.
●
Mime-Flood: Indicates status of protection against MIME Flood attacks.
●
FTP-Bounce: Indicates status of protection against FTP Bounce attacks.
●
IP-Unaligned-Timestamp: Indicates status of protection against IP Unaligned
Timestamp attacks.
Timestamp attacks.
●
Seq-Number-Prediction: Indicates status of protection against Sequence Number
Prediction attacks.
Prediction attacks.
●
TCP-Window-Containment: Indicates status of protection against TCP Window
Containment.
Containment.
●
Teardrop: Indicates status of protection against Teardrop attacks.