Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
PDIF Session Recovery
▀ Session Recovery
▄ Cisco ASR 5000 Series Enhanced Feature Configuration Guide
OL-22983-01
Enabling or Disabling Session Recovery from the CLI
Enabling or disabling session recovery is done on a chassis-wide basis.
Enabling Session Recovery on an Out-of-Service System
The following procedure is for a system that does not have any contexts configured.
Step 1
At the Exec mode prompt, verify that the session recovery feature is enabled by the session and feature use license on
the system by entering the following command:
the system by entering the following command:
The output of this command appears similar to the example shown below. Session Recovery is shown in bold. If there
were no current license, another would have to be applied before Session Recovery could be enabled.
were no current license, another would have to be applied before Session Recovery could be enabled.
Enabled Features: