Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
NAT Configuration
Configuring NAT ▀
Cisco ASR 5000 Series Network Address Translation Administration Guide ▄
OL-22992-01
Important:
Commands used in the configuration examples in this section provide base functionality to the extent
that the most common or likely commands and/or keyword options are presented. In many cases, other optional
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
Enabling the ECS Subsystem and Creating the ECS Service
To enable the ECS subsystem and create the enhanced charging service, use the following configuration:
Configuring Port Maps
This is an optional configuration. To create and configure an application-port map for TCP and UDP protocols, use the
following configuration:
following configuration:
Notes:
A maximum of 256 host pools, IMSI pools, and port maps each, and a combined maximum of 4096 rules (host
pools + IMSI pools + port maps + charging ruledefs + access ruledefs + routing ruledefs) can be created in a
system.
system.
Port maps, host pools, IMSI pools, and charging, access, and routing ruledefs must each have unique names.
A maximum of 10 entries can be configured in each port map.