Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
PDN Gateway Configuration
▀ Configuring the System as a Standalone eGTP P-GW
▄ Cisco ASR 5000 Series Packet Data Network Gateway Administration Guide
OL-22985-01
Required
Information
Information
Description
IP address
S5/S8 interface IPv4 address.
P-GW Service Configuration
P-GW service
name
name
An identification string from 1 to 63 characters (alpha and/or numeric) by which the P-GW service will be
recognized by the system.
Multiple names are needed if multiple P-GW services will be used.
recognized by the system.
Multiple names are needed if multiple P-GW services will be used.
PLMN ID
MCC number: The mobile country code (MCC) portion of the PLMN’s identifier (an integer value between
100 and 999).
MNC number: The mobile network code (MNC) portion of the PLMN’s identifier (a 2 or 3 digit integer value
between 00 and 999).
100 and 999).
MNC number: The mobile network code (MNC) portion of the PLMN’s identifier (a 2 or 3 digit integer value
between 00 and 999).
eGTP Service Configuration
eGTP Service
Name
Name
An identification string from 1 to 63 characters (alpha and/or numeric) by which the eGTP service will be
recognized by the system.
recognized by the system.
Required PDN Context Configuration Information
The following table lists the information that is required to configure the PDN context on a P-GW.
Table 11.
Required Information for PDN Context Configuration
Required
Information
Description
PDN context name
An identification string from 1 to 79 characters (alpha and/or numeric) by which the PDN context is
recognized by the system.
recognized by the system.
IP Address Pool Configuration
IPv4 address pool
name and range
name and range
An identification string between 1 and 31 characters (alpha and/or numeric) by which the IPv4 pool is
recognized by the system.
Multiple names are needed if multiple pools will be configured.
A range of IPv4 addresses defined by a starting address and an ending address.
recognized by the system.
Multiple names are needed if multiple pools will be configured.
A range of IPv4 addresses defined by a starting address and an ending address.
IPv6 address pool
name and range
name and range
An identification string between 1 and 31 characters (alpha and/or numeric) by which the IPv6 pool is
recognized by the system.
Multiple names are needed if multiple pools will be configured.
A range of IPv6 addresses defined by a starting address and an ending address.
recognized by the system.
Multiple names are needed if multiple pools will be configured.
A range of IPv6 addresses defined by a starting address and an ending address.
Access Control List Configuration
IPv4 access list
name
name
An identification string between 1 and 47 characters (alpha and/or numeric) by which the IPv4 access list is
recognized by the system.
Multiple names are needed if multiple lists will be configured.
recognized by the system.
Multiple names are needed if multiple lists will be configured.