Philips Wireless TV link SLV5400 SLV5400/05 Dépliant

Issue date 2011-01-09

Version: 4.0.8

12 NC: 9082 100 05004
EAN: 87 10895 90450 6

© 2011 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice. 
Trademarks are the property of Koninklijke Philips 
Electronics N.V. or their respective owners.

Specifications

SLV5400/05

Wireless TV link

  

Highlights

 

The wireless link uses standard SCART and cinch 

plugs that are used by almost every brand of audio/

video devices. If you device has one of these standard 

connectors it works with the wireless link

The easy way to switch between your DVD player, 

satellite receiver, VCR or set-top box without having 

to reconfigure your entire home cinema set-up. The 

wireless TV link has four separate inputs, each with 

its own SCART connector, to allow you to connect 

up to four devices.

The easy way to switch between your DVD player, 

satellite receiver, VCR or set-top box without having 

to reconfigure your entire home cinema set-up. The 

wireless TV link has four separate inputs, each with 

its own SCART connector, to allow you to connect 

up to four devices.

Extend your possibilities for viewing movies, sports 

events, live performances and a range of TV channels 

anywhere in your home. The wireless TV link is 

suitable for transmission of AV content of all brands 

of PayTV and Pay-per-View decoders, satellite 

receivers, set-top boxes, DVD players, VCRs and 

camcorders.

The wireless link uses standard SCART and cinch 

plugs that are used by almost every brand of audio/

video devices.

There's no need to swap cables at the transmitter to 

view any video device on the second TV. Simple 

press the input selection button to switch from input 

device.

If you store your audio/video devices in a cabinet, 

you cannot operate these devices with a normal IR 

remote control. The Philips wireless remote control 

link allows you to operate these devices with the 

cabinet doors closed thanks to an RF-based link that 

picks up the infrared signals of a remote control and 

translates them into RF. The receiver unit then 

translates them back to IR.

You can record any A/V input source - regardless of 

what you are watching on your main TV or on your 

second TV - thanks to this record function. You 

simply instruct the transmitter box which device 

should be recorded on your VCR or DVD-R.

A 2.4 GHz wireless link between the receiver and 

transmitter means you don't have to lay cables or 

drill holes through walls.

There's no need to buy or rent duplicate A/V 

equipment. The wireless RF system extends your 

possibilities for viewing DVD movies and your 

favorite Satellite or TV channels anywhere in your 

home. With a range of up to 30 meters inside the 

house, it delivers high-quality video and stereo audio 

no matter where your second TV is located.

• Antenna location: Picture & sound: Internal, RC 

extender: External

• Frequency range: picture & sound: 2.4 GHz RC 

extender: 433 MHz MHz

• TV  system:  PAL,  SECAM

• Typical range indoor: 15-30 m

• Typical range outdoor: 100 m

• Remote control extender

• Supported IR carrier frequency: 32-57 KHz

• AC/DC Adaptor: 2x 12VDC, 500mA

• Remote control: Slim Card, with Batteries

• Receiver dimensions (W x H x D): 

146 x 146 x 62 mm

• Temperature (operation): +5ºC to +35ºC

• Transmitter dimensions (W x H x D): 

270 x 146 x 62 mm

• Power consumption: 15 W

• Power supply: AC/DC Adapter, 220-240V

• SCART 1: CVBS in, Audio L+R in

• SCART 2: CVBS in, Audio L+R in

• SCART 3: CVBS in, Audio L+R in, RGB in

• SCART 4: RGB, CVBS in/out, Audio L+R in/out

• SCART Out: RGB, CVBS out, Audio L+R out

• Audio out: RCA Stereo (Red/White)

• SCART out: CVBS out, Audio L+R out

•