Cisco Cisco Nexus 5010 Switch Guida Alla Risoluzione Dei Problemi
Troubleshoot Nexus 5000 Port-channel
Loadbalancing
Loadbalancing
Contents
Introduction
Prerequisites
Requirments
Components Used
Problem
Network Diagram
Troubleshoot
Scenario 1: Multicast traffic forwarding when FP enabled on vPC peer-link
Scenario 2: Multicast loadbalancing within port-channel
Solution
Usefeul Commands
Related Information
Known defects
Introduction
This document describes how to troubleshoot port-channel load balancing in Nexus 5000
switches with multicast traffic.
switches with multicast traffic.
Contributed by Sivakumar Sukumar, Cisco TAC Engineer.
Prerequisites
Requirments
Cisco recommends that you have knowledge of these topics:
Cisco Nexus 5672UP and router e.g ASR supports multicast
●
Basic undesrstanding of Virtual Port-channel (vPC) , fapric path(FP) and Multicat(MC)
technology
technology
●
Components Used
This document is not restricted to specific software and hardware versions.
The information in this document was created from the devices in a specific lab environment. All of
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.