Cisco Cisco Nexus 5010 Switch Manuale Tecnico
Definitions
Virtual Ethernet Module (VEM). Cisco Software module that runs inside the ESX hypervisor and
provides VNLink implementation in a single package
provides VNLink implementation in a single package
•
Network IO Virtualization (NIV) uses VNtagging in order to deploy several Virtual Network Links
(VN-Link) across the same physical Ethernet channel
(VN-Link) across the same physical Ethernet channel
•
Datacenter Bridging Capability Exchange (DCBX)
•
VNIC Interface Control (VIC)
•
Virtual NIC (VNIC), which indicates a host endpoint. It can be associated with an active VIF or a
standby VIF
standby VIF
•
Distributed Virtual Port (DVPort). VNIC is connected to the DVPort in the VEM
•
NIV Virtual Interface (VIF), which is indicated at a network endpoint
•
Virtual Ethernet (vEth) interface represents VIF at the switch
•
Pass-Through Switch (PTS). VEM module installed in the hypervisor
•
Note
: The VEM used in VM-FEX is similar to the VEM used with the Nexus 1000v. The difference is that in
VM-FEX, the VEM operates in pass-through mode and does not perform local switching between VMs on the
same ESX.
same ESX.
Configure
The topology is a UCS-C server with P81E VIC dual-homed to two Nexus 5548 VPC switches.
Note:
Use the Command Lookup Tool (registered customers only) in order to obtain more information on the
commands used in this section.
Network Diagram