Cisco Cisco Nexus 5010 Switch Manuale Tecnico
2x UCS 6248 fabric interconnects (FIs) - runs 2.2 software. Called bdsol-6248-03-, A and B.
●
2x NetApp 3220 - runs version 8.1. Called bdsol-3220-01-, A and B.
●
The information in this document was created from the devices in a specific lab environment. All of
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
Configure
Network Diagram
All of the diagrams in this document were created in draw io at
.
Physical Network
This configuration is meant to be a simple reference. It utilizes single links even though the port
channels mentioned can be easily extended with more links to provide more bandwidth.
channels mentioned can be easily extended with more links to provide more bandwidth.
Between the UCS FIs and the Nexus 5000s there is only a single link on each side.
Between each Nexus 5000 and each NetApp there is also one link bound to corresponding VPCs.