Cisco Cisco Nexus 5010 Switch Libro bianco

White Paper 

© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. 

Page 21 of 56

 

 

2. 

In the Virtual FC Interfaces dialog box that appears, select the VSAN Id Port column and enter the VSAN to 

which the vFC interface should be configured. 

 

 

 

Role-based access control (RBAC) provides the necessary framework to create and deploy roles for different users. 

User roles are defined by rules that specify the access permissions each person assigned to that role is allowed. 

Each user role can contain multiple rules, and each user can belong to more than one role. For example, if role1 

allows access only to configuration operations, and role2 allows access only to debug operations, then users who 

belong to both role1 and role2 can access both configuration and debug operations. 

User roles can be defined to limit the switch resources that the user can access as well as to limit more granular 

access to entities such as interfaces, VLANs, and VSANs.  

Rules are the basic element of a role. A rule specifies the operations a user is permitted to perform. Rules can be 

assigned on a command, feature, or feature-group basis. To learn more about the configuration parameters, please 

refer the system management section of the Cisco Nexus 5000 Series Switches configuration guide: 

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli/sec_rbac.html