Cisco Cisco Aironet 350 Access Points
16
Release Notes for Cisco Aironet 350, 1100, and 1200 Series Access Points for Cisco IOS Release 12.2(13)JA
OL-4529-01
Caveats
•
CSCea88706, CSCeb51208, CSCec03118, CSCec16687, CSCec16708—You can now modify
existing MAC address and Ethertype filters on the access point web-browser interface.
existing MAC address and Ethertype filters on the access point web-browser interface.
•
CSCea88862—You can now run a link test using thousands of packets on the web-browser interface.
•
CSCea89985—The access point no longer generates a traceback when you configure hot standby
mode using a broadcast MAC address to specify the access point to be monitored.
mode using a broadcast MAC address to specify the access point to be monitored.
•
CSCea91378—When you run a carrier busy test on the web-browser interface when the access point
radio is disabled, the web-browser interface no longer reports that the test failed.
radio is disabled, the web-browser interface no longer reports that the test failed.
•
CSCea91424—When a CCKM client device roams successfully to a foreign network using proxy
Mobile IP, the access point no longer displays error messages.
Mobile IP, the access point no longer displays error messages.
•
CSCeb06139—When several mobile clients are using Cisco Centralized Key Management
(CCKM), the access point no longer reboots when you enter the show wlccp wds mn detail
command.
(CCKM), the access point no longer reboots when you enter the show wlccp wds mn detail
command.
•
CSCeb15588—The access point now accepts the aironet RADIUS attribute in the Cisco
vendor-specific attribute (VSA), and the Cisco PEAP supplicant now works correctly with Cisco
ACS version 3.1.1.
vendor-specific attribute (VSA), and the Cisco PEAP supplicant now works correctly with Cisco
ACS version 3.1.1.
•
CSCeb36095—Access points running Cisco IOS software now send the same RADIUS
NAS-port-type value as access points running VxWorks.
NAS-port-type value as access points running VxWorks.
•
CSCeb36192—The access point now assigns user VLANs correctly whether or not multiple SSIDs
are configured.
are configured.
•
CSCeb39541—The default EAP client timeout (the length of time that the access point waits for a
client to respond to the access point’s EAP request) has changed from 10 seconds to 30 seconds.
client to respond to the access point’s EAP request) has changed from 10 seconds to 30 seconds.
•
CSCeb47892—You can now use the web-browser interface to disable the access point radio after
setting the role in radio network to Access Point Root (Fallback to Radio Shutdown).
setting the role in radio network to Access Point Root (Fallback to Radio Shutdown).
•
CSCeb48645—Client devices in power-save mode no longer lock up when associated to an access
point running Cisco IOS software.
point running Cisco IOS software.
•
CSCeb52239, CSCec20465—The access point now correctly assigns VLANs to devices connected
to a workgroup bridge.
to a workgroup bridge.
•
CSCeb60581—The access point now sends the correct username with RADIUS accounting packets.
•
CSCeb69596—You can now enter the letters in MAC addresses using either upper-case or
lower-case letters when using the web-browser interface to configure MAC-address filtering or
authentication.
lower-case letters when using the web-browser interface to configure MAC-address filtering or
authentication.
•
CSCeb76171—The web-browser interface now displays pages correctly when a message-of-the-day
(MOTD) banner is configured on the CLI.
(MOTD) banner is configured on the CLI.
•
CSCeb87628—Client devices using PEAP authentication now authenticate successfully through the
access point.
access point.
•
CSCeb87982—The access point now correctly displays hot standby status and event messages.
•
CSCec00308—Efficient Speedstream DHCP server now responds to Cisco IOS DHCP discover
packets.
packets.
•
CSCec07703—Cisco 7920 IP Phones no longer drop calls when associated to 1100 and 1200 series
access points.
access points.
•
CSCec12813—Client devices in power-save mode no longer lose packets when they wake up.
•
CSCec15572—You can now use the [no] boot upgrade global configuration command to configure
the access point to boot without loading a configuration.
the access point to boot without loading a configuration.