Cisco Cisco Packet Data Gateway (PDG) Guida Dell'Amministratore
Gx Interface Support
▀ Rel. 8 Gx Interface
▄ Cisco ASR 5x00 Home Agent Administration Guide
162
updated usage monitoring is started and constantly checked with the usage threshold whenever the
data traffic is present.
data traffic is present.
Usage Monitoring for Dynamic Rules: If the usage monitoring needs to be enabled for dynamic
ruledefs, PCRF provides the monitoring key along with a charging rule definition and the usage
monitoring information containing the monitoring key and the usage threshold. This would result in
the usage monitoring being done for all the rules associated with that monitoring key. After DPCA
parses the AVPs, IMSA updates the information to ECS. Once ECS is updated, the usage monitoring
is started and constantly checked with the usage threshold whenever the data traffic is present.
Monitoring key for dynamic ruledef is dynamically assigned by PCRF which is the only difference
with predefined rules in case of usage monitoring.
monitoring information containing the monitoring key and the usage threshold. This would result in
the usage monitoring being done for all the rules associated with that monitoring key. After DPCA
parses the AVPs, IMSA updates the information to ECS. Once ECS is updated, the usage monitoring
is started and constantly checked with the usage threshold whenever the data traffic is present.
Monitoring key for dynamic ruledef is dynamically assigned by PCRF which is the only difference
with predefined rules in case of usage monitoring.
In releases prior to 15.0, when threshold breach happens for multiple monitoring keys at the same time, only one of the
monitoring key’s usage is reported and the rest of the monitoring keys’ usage is reported in CCR-T (threshold set to
infinity). On Tx expiry/TCP link error, unreported usage is stored at ECS and reported only on session termination.
monitoring key’s usage is reported and the rest of the monitoring keys’ usage is reported in CCR-T (threshold set to
infinity). On Tx expiry/TCP link error, unreported usage is stored at ECS and reported only on session termination.
In 15.0 and later releases, only one of the monitoring key’s usage is reported first. Upon receiving successful response
from PCRF, the rest of the monitoring keys’ usage is reported to PCRF. On Tx expiry/TCP link error, unreported usage
is stored at ECS. Any future successful interaction with PCRF for the session will send unreported UMI to PCRF.
from PCRF, the rest of the monitoring keys’ usage is reported to PCRF. On Tx expiry/TCP link error, unreported usage
is stored at ECS. Any future successful interaction with PCRF for the session will send unreported UMI to PCRF.
Usage Reporting
Usage at subscriber/flow level is reported to PCRF under the following conditions:
Usage Threshold Reached: PCEF records the subscriber data usage and checks if the usage threshold provided
by PCRF is reached. This is done for both session and rule level reporting.
For session-level reporting, the actual usage volume is compared with the usage volume threshold.
For rule-level reporting the rule that hits the data traffic is used to find out if the monitoring key is associated
with it, and based on the monitoring key the data usage is checked. Once the condition is met, it reports the
usage information to IMSA and continues monitoring. IMSA then triggers the CCR-U if “USAGE_REPORT”
trigger is enabled by the PCRF. The Usage-Monitoring-Information AVP is sent in this CCR with the “Used-
Service-Unit” set to the amount of data usage by subscriber.
with it, and based on the monitoring key the data usage is checked. Once the condition is met, it reports the
usage information to IMSA and continues monitoring. IMSA then triggers the CCR-U if “USAGE_REPORT”
trigger is enabled by the PCRF. The Usage-Monitoring-Information AVP is sent in this CCR with the “Used-
Service-Unit” set to the amount of data usage by subscriber.
If PCRF does not provide a new usage threshold in the usage monitoring information as a result of CCR from
PCEF when the usage threshold is reached, the usage monitoring is stopped at PCEF and no usage status is
reported.
PCEF when the usage threshold is reached, the usage monitoring is stopped at PCEF and no usage status is
reported.
In the non-standard Volume Reporting over Gx implementation, usage monitoring will be stopped once the
threshold is breached, else the monitoring will continue. There will be no further usage reporting until the CCA
is received.
threshold is breached, else the monitoring will continue. There will be no further usage reporting until the CCA
is received.
Usage Monitoring Disabled: If the PCRF explicitly disables the usage monitoring with Usage-Monitoring-
Support AVP set to USAGE_MONITORING_DISABLED, the PCEF stops monitoring and reports the usage
information (when the monitoring was enabled) to PCRF if the usage monitoring is disabled by PCRF as a
result of CCR from PCEF which is not related to reporting usage, other external triggers, or a PCRF internal
trigger. If the PCRF does not provide a new usage threshold as a result of CCR from PCEF when the usage
threshold is reached, the usage monitoring is stopped at PCEF and no further usage status is reported.
information (when the monitoring was enabled) to PCRF if the usage monitoring is disabled by PCRF as a
result of CCR from PCEF which is not related to reporting usage, other external triggers, or a PCRF internal
trigger. If the PCRF does not provide a new usage threshold as a result of CCR from PCEF when the usage
threshold is reached, the usage monitoring is stopped at PCEF and no further usage status is reported.
IP CAN Session Termination: When the IP CAN session is terminated, the accumulated subscriber usage
information is reported to PCRF in the CCR-T from PCEF. If PCC usage level information is enabled by
PCRF, the PCC usage will also be reported.
PCRF, the PCC usage will also be reported.
PCC Rule Removal: When the PCRF deactivates the last PCC rule associated with a usage monitoring key, the
PCEF sends a CCR with the data usage for that monitoring key. If the PCEF reports the last PCC rule
associated with a usage monitoring key is inactive, the PCEF reports the accumulated usage for that monitoring
key within the same CCR command if the Charging-Rule-Report AVP was included in a CCR command;
associated with a usage monitoring key is inactive, the PCEF reports the accumulated usage for that monitoring
key within the same CCR command if the Charging-Rule-Report AVP was included in a CCR command;