Cisco Cisco Packet Data Gateway (PDG) Dépliant

 

 

 

PCC Rule BW Limit Dnl Bytes 

Total number of downlink bytes dropped due to PCC rule bandwidth limiting. 

PCC Rule Gating Upl Pkts 

Total number of uplink packets dropped due to PCC rule gating. 

PCC Rule Gating Dnl Pkts 

Total number of downlink packets dropped due to PCC rule gating. 

PCC Rule Gating Upl Bytes 

Total number of uplink bytes dropped due to PCC rule gating. 

PCC Rule Gating Dnl Bytes 

Total number of downlink bytes dropped due to PCC rule gating. 

RuleMatch Fail Upl Pkts 

Total number of uplink packets dropped due to rule match failure. 

RuleMatch Fail Dnl Pkts 

Total number of downlink packets dropped due to rule match failure. 

RuleMatch Fail Upl Bytes 

Total number of uplink bytes dropped due to rule match failure. 

RuleMatch Fail Dnl Bytes 

Total number of downlink bytes dropped due to rule match failure. 

Credit-Control 

Indicates DCCA status: On/Off 

CC Peer 

Name of the credit control (CC) peer. 

CC Group 

Displays the selected credit control group information. 

CC Mode 

Indicates the credit control mode: RADIUS or DIAMETER 

CC Failure Handling 

Action configured for credit control failure handling. 

CC Session Failover 

Credit control session failover status. 

CCR-I Server Unreachable 
Handling 

Indicates whether initial-request calls will be continued/terminated when Diameter 
server(s)/OCS are unreachable. 

CCR-U Server Unreachable 
Handling 

Indicates whether update-request calls will be continued/terminated when Diameter 
server(s)/OCS are unreachable. 

Total CCR-U 

The total number of CCR-Updates (Credit Control Request with Update) messages sent to 
the credit control server. 

Current Server Unreachable State 

Indicates that the Diameter server(s)/OCS are unreachable. 

 Interim Volume in Bytes (used / 
allotted) 

Indicates how much of data volume has been currently consumed and the total allocated 
value. This value will be reset once the session comes out of Server-Unreachable-State i.e. 
when the server becomes available again. 

 Interim Time in Seconds (used / 
allotted) 

Indicates how much of time has been used up and the total allocated time. This value will be 
reset once the session comes out of Server-Unreachable-State i.e. when the server becomes 
available again. 

 Server Retries (attempted / 
configured) 

Indicates the total number of retries that were configured and attempted to the Diameter 
server during the Server-Unreachable-State. 

Current TCP Proxy Flows 

Total number of current TCP Proxy flows for the session. 

Total TCP Proxy Flows 

Total number of TCP Proxy flows for the session. 

TCP-proxy reset for non-SYN 
flows 

 Total number of resets sent by TCP Proxy for flows with no SYN packet after recovery. 

Current IP Flows 

Total number of current IP flows.