Cisco Cisco Packet Data Gateway (PDG) Dépliant
show apn
show apn all ▀
Cisco ASR 5x00 Statistics and Counters Reference ▄
2759
Field
Description
Uplink Negotiate Limit
Specifies whether traffic data QoS negotiation limit in uplink direction is enabled or not for
this class of QoS in this APN. By default it’s disabled.
this class of QoS in this APN. By default it’s disabled.
Peak Data Rate (in bps)
The peak data rate in bit per seconds for this class of QoS in this APN.
Committed Data Rate(in bps)
The committed data rate in bit per seconds for this class of QoS in this APN.
Downlink Rate Limit
Specifies whether traffic data rate limit in downlink direction is enabled or not for this class of
QoS in this APN.
QoS in this APN.
Uplink Rate Limit
Specifies whether traffic data rate limit in uplink direction is enabled or not for this class of
QoS in this APN.
QoS in this APN.
Burst Size
This group indicates the static/dynamic burst size in bytes for peak and guaranteed rate limiting
for this class of QoS in this APN.
for this class of QoS in this APN.
Auto Readjust
Indicates whether auto readjustment of burst size is enabled or not.
Possible states are:
Possible states are:
Enabled
Disabled
Auto Readjust Duration
Indicates the configured auto readjust duration in a seconds.
If auto readjust is enabled and no readjust duration is specified the default value is 1 second.
If auto readjust is enabled and no readjust duration is specified the default value is 1 second.
Peak Burst Size(bytes)
Indicates the peak burst size in bytes calculated dynamically by auto readjust duration and rate
limit value.
limit value.
Guaranteed Burst Size(bytes)
Indicates the guaranteed burst size in bytes calculated dynamically by auto readjust duration
(seconds) and rate limit value (bytes).
This counter is applicable only when auto readjustment is enabled.
(seconds) and rate limit value (bytes).
This counter is applicable only when auto readjustment is enabled.
Exceed Action
Specifies the action on downlink/uplink data rate when exceeds the allowed rate limit for this
class of QoS. Possible actions are:
class of QoS. Possible actions are:
drop: drop the packets.
lower-ip-precedence: transmit the packet after lowering the ip-precedence.
transmit: transmit the packet.
Violate Action
Specifies the action on downlink/uplink data rate violation of allowed rate limit for this class of
QoS. Possible actions are:
QoS. Possible actions are:
drop: drop the packets.
lower-ip-precedence: transmit the packet after lowering the ip-precedence.
shape: enables the traffic shaping and provides the buffering of user packets when
subscriber traffic violates the allowed peak/committed data rate.
subscriber traffic violates the allowed peak/committed data rate.
shape-transmit-when-buffer-full: enables the traffic shaping and allows the packet
to be transmitted when buffer memory is full.
to be transmitted when buffer memory is full.
transmit: transmit the packet.
APN-AMBR
Specifies the traffic statistics for APN Maximum Bit Rate.