Cisco Cisco WAP4410N Wireless-N Access Point - PoE Advanced Security
Release Notes for WAP4410N Access Point Firmware Version 2.0.6.1
5
Release Notes
Changes Since WAP4410N Firmware Version 2.0.4.1
The firmware was updated and the following was fixed in firmware version 2.0.4.2.
•
WDS mode with repeater options and TKIP/AES encryption is fixed.
Changes Since WAP4410N Firmware Version 2.0.3.3
The firmware was updated and problems were fixed in firmware version 2.0.4.1.
•
Updated LSDK and WLAN driver.
•
Added Ethernet Duplex Mode and Date Rate settings.
•
Fixed WDS connection issue when using WPA/WPA2 security.
•
Fixed memory leak issue.
Known Issues
These known issues were identified in firmware version 2.0.4.1.
•
Space(s) in the SSID are allowed but currently they will cause the SSID to
display as a blank string. Selecting the blank SSID with connect and feature
performance is not affected.
display as a blank string. Selecting the blank SSID with connect and feature
performance is not affected.
•
There are known issues regarding wireless isolation, affecting both
between SSIDs and within SSIDs.
between SSIDs and within SSIDs.
Workaround: None.
•
Google Chrome browser does not support the loading of the firmware
upgrade.
upgrade.
Workaround: Perform the firmware upgrade using Firefox or Internet
Explorer (IE).
Explorer (IE).
•
From the Wireless tab, select the security settings page. On this page, click
the “Help” link located in the top right corner. There is an incorrect spelling
on this page; the word “with” should be “within.”
the “Help” link located in the top right corner. There is an incorrect spelling
on this page; the word “with” should be “within.”