Cisco Cisco Packet Data Gateway (PDG)
Troubleshooting
Detecting Faulty Hardware ▀
ASR 5500 System Administration Guide, StarOS Release 17 ▄
183
Figure 12. FSC Status LEDs
The possible states for all FSC LEDs are described in the sections that follow.
FSC Run/Fail LED States
The FSC Run/Fail LED indicates the overall status of the card. This LED should be green for normal operation.
The possible states for this LED are described in the following table. If the LED is not green, use the troubleshooting
information in the table to diagnose the problem.
information in the table to diagnose the problem.
Table 24. FSC Run/Fail LED States
Color
Description
Troubleshooting
Green
Card powered with no
errors detected
errors detected
None needed.
Blinking
Green
Green
Card is initializing and/or
loading software
loading software
This is normal operation during boot-up.
Red
Card powered with error(s)
detected
detected
Errors were detected during the Power On Self Tests (POSTs). It is likely that the
errors were logged to the system's command line interface during boot.
errors were logged to the system's command line interface during boot.
None
Card is not receiving
power
power
for troubleshooting information.
Verify that the power source is supplying ample voltage and current to the chassis.