Cisco Cisco Packet Data Gateway (PDG)
Software Management Operations
Maintaining the Local File System ▀
ASR 5000 System Administration Guide, StarOS Release 18 ▄
133
[local]host_name# rename { /flash | /pcmcia1 | /hd-raid } /src_filename { /flash
| /pcmcia1 | /hd-raid } /dst_filename [-noconfirm]
| /pcmcia1 | /hd-raid } /dst_filename [-noconfirm]
Use the following command to rename a file named iot_test.cfg to iot_accept.cfg on the /flash local device.
[local]host_name# rename /flash/iot_test.cfg /flash/iot_accept.cfg -noconfirm
Important:
Use the rename command only within the same local device. You cannot rename a file and place it
onto another local device at the same time. To move a renamed file, you must use the
copy
command.
Copying Files
These instructions assume that you are at the root prompt for the Exec mode. To copy files, enter the following
command:
command:
[local]host_name# copy from_url to_url [-noconfirm]
To copy a configuration file called system.cfg from a directory that was called cfgfiles to a directory named configs_old
on the CompactFlash in the SMC, enter the following command:
on the CompactFlash in the SMC, enter the following command:
[local]host_name# copy /flash/cfgfiles/system.cfg
/flash/configs_old/system_2011.cfg
/flash/configs_old/system_2011.cfg
To copy a configuration file called simple_ip.cfg from a directory called host_name_configs to an FTP server with an IP
address of 192.168.34.156, on which you have an account with a username of administrator and a password of secure,
use the following command:
address of 192.168.34.156, on which you have an account with a username of administrator and a password of secure,
use the following command:
[local]host_name# copy /flash/host_name_configs/simple_ip.cfg
ftp://administrator:secure@192.168.34.156/host_name_configs/ simple_ip.cfg
ftp://administrator:secure@192.168.34.156/host_name_configs/ simple_ip.cfg
To copy a configuration file called init_config.cfg to the root directory of a TFTP server with a hostname of
config_server, enter the following command:
config_server, enter the following command:
[local]host_name# copy /flash/cfgfiles/init_confg.cfg
tftp://config_server/init_config.cfg
tftp://config_server/init_config.cfg
Deleting Files
The delete command removes a designated file from its specified location on the local file system. This command can
only be issued to a local device on the SMC. Note that this command does not allow for wildcard entries; each filename
must be specified in its entirety.
only be issued to a local device on the SMC. Note that this command does not allow for wildcard entries; each filename
must be specified in its entirety.
Caution:
Do not delete the boot.sys file. If deleted, the system will not reboot on command and will be
rendered inoperable.
[local]host_name# delete { /flash | /pcmcia1 | /hd-raid } /filename [-noconfirm]
The following command deletes a file named test.cfg from the /flash directory.
[local]host_name# delete /flash/test.cfg