Cisco Cisco Packet Data Gateway (PDG)
dcca peer-select
Specifies the Diameter credit control primary and secondary host for credit control.
Product
GGSN
ACS
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-apn)#
Syntax Description
dcca peer-select peer host_name
[
realm realm_name
] [
secondary-peer host_name
]
no dcca peer-select
no
Removes the previously configured Diameter credit control peer selection.
host_name
Specifies a unique name for the peer as an alphanumeric string of 1 through 63 characters that allows
punctuation marks.
punctuation marks.
realm realm_name
Specifies the ream as an alphanumeric string of from 1 through 127 characters that allows punctuation marks.
The realm may typically be a company or service name.
The realm may typically be a company or service name.
secondary-peer host_name
Specifies a back-up host that is used for fail-over processing as an alphanumeric string of from 1 through 63
characters. When the route-table does not find an AVAILABLE route, the secondary host performs fail-over
processing.
characters. When the route-table does not find an AVAILABLE route, the secondary host performs fail-over
processing.
Command Line Interface Reference, Modes A - B, StarOS Release 19
1577
APN Configuration Mode Commands
dcca peer-select