Cisco Cisco Packet Data Gateway (PDG)
dhcpv6 context-name
Configures the name of the context on the system in which DHCPv6 functionality is configured. If a DHCPv6
service is configured in the APN, this DHCPv6 context name is used to get an address
service is configured in the APN, this DHCPv6 context name is used to get an address
Product
GGSN
P-GW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-apn)#
Syntax Description
dhcpv6 context-name ctxt_name
[
no
]
dhcp context-name
no
Removes a previously configured context name.
ctxt_name
Specifies the name of a context configured on the system in which one or more DHCPv6 services are configured.
ctxt_name is an alphanumeric string of 1 through 79 characters that is case sensitive.
ctxt_name is an alphanumeric string of 1 through 79 characters that is case sensitive.
Usage Guidelines
If the APN is to support dynamic address assignment via DHCPv6, this parameter must be configured to point
the APN to the name of a pre-configured context on the chassis in which one or more DHCPv6 services are
configured.
the APN to the name of a pre-configured context on the chassis in which one or more DHCPv6 services are
configured.
The command can be used to identify a single DHCPv6 service instance within the specified context to use
to facilitate the address assignment.
to facilitate the address assignment.
Examples
The following command configures the APN to look for DHCPv6 services in a context called dhcpv6-ctx:
dhcpv6 context-name dhcpv6-ctx
dhcpv6 context-name dhcpv6-ctx
Command Line Interface Reference, Modes A - B, StarOS Release 19
1583
APN Configuration Mode Commands
dhcpv6 context-name