Cisco Cisco Packet Data Gateway (PDG)
fw-and-nat policy
Specifies the Firewall-and-NAT policy to be used for subscribers who use this APN.
Product
eWAG
PSF
NAT
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-apn)#
Syntax Description
fw-and-nat policy fw_nat_policy
{ default | no } fw-and-nat policy
{ default | no } fw-and-nat policy
default
Configures the default setting.
Default: The default Firewall-and-NAT policy configured in the rulebase is used for subscribers who use this
APN.
APN.
no
Disables Firewall and NAT for the APN.
fw_nat_policy
Specifies the Firewall-and-NAT policy for the APN as an alphanumeric string of 1 through 63 characters.
Note that this policy will override the default Firewall-and-NAT policy configured in the ACS rulebase.
Note that this policy will override the default Firewall-and-NAT policy configured in the ACS rulebase.
Usage Guidelines
Use this command to configure the Firewall-and-NAT policy for the APN. Note that the policy configured
in the subscriber mode will override the default policy configured in the ACS rulebase. If a policy is not
configured in the subscriber mode, the default policy configured in the ACS rulebase will be used.
in the subscriber mode will override the default policy configured in the ACS rulebase. If a policy is not
configured in the subscriber mode, the default policy configured in the ACS rulebase will be used.
Command Line Interface Reference, Modes A - B, StarOS Release 19
1597
APN Configuration Mode Commands
fw-and-nat policy