Cisco Cisco Packet Data Gateway (PDG)
tunnel gre
Configures Generic Routing Encapsulation (GRE) tunnel parameters between the GGSN and an external
gateway for the APN.
gateway for the APN.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-apn)#
Syntax Description
tunnel gre peer-address peer_address local-address local_addr [ preference num ]
no tunnel gre peer-address peer_address
no tunnel gre peer-address peer_address
no
Disables GRE tunneling for the APN.
peer-address peer_address
Specifies the IP address of the external gateway terminating the GRE tunnel.
peer_address must be expressed in dotted decimal notation.
local-address local_addr
Specifies the IP address of the interface in the destination context of the GGSN originating the GRE tunnel.
local_addr must be expressed in IPv4 dotted-decimal notation.
preference num
Default: 1
This option can be used to assign a preference to the tunnel.
preference can be configured to any integer value from 1 to 128.
Command Line Interface Reference, Modes A - B, StarOS Release 19
1739
APN Configuration Mode Commands
tunnel gre