Manualsbrain.com
  1. Manuali
  2. Marche
  3. Cisco
  4. Cisco Packet Data Gateway (PDG)

Cisco Cisco Packet Data Gateway (PDG)

Scarica
Pagina di 2186
flow limit-for-bandwidth
This command allows you to configure the flow limit-for-bandwidth parameter for the current bandwidth
policy.
Product
ACS
Privilege
Security Administrator, Administrator
Command Modes
Exec > ACS Configuration > Bandwidth Policy Configuration
active-charging service service_name > bandwidth-policy policy_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-bandwidth-policy)#
Syntax Description
flow limit-for-bandwidth id bandwidth_id group-id group_id
no flow limit-for-bandwidth id bandwidth_id
no
If previously configured, removes the specified flow limit-for-bandwidth configuration in the current bandwidth
policy.
id bandwidth_id
Specifies ID for the current bandwidth policy.
bandwidth_id must be an integer from 1 through 65535.
group-id group_id
Specifies group ID for the current bandwidth policy.
group_id must be an integer from 1 through 65535.
Usage Guidelines
Use this command to configure the flow limit-for-bandwidth configuration for a bandwidth policy.
Examples
The following command configures the Flow Limit-for-Bandwidth configuration with bandwidth policy ID
test123 and group ID 123:
flow limit-for-bandwidth id test123 group-id 123
   Command Line Interface Reference, Modes A - B, StarOS Release 19
294
ACS Bandwidth Policy Configuration Mode Commands
flow limit-for-bandwidth