Cisco Cisco Packet Data Gateway (PDG)
nat unsolicited-pkts
This command allows you to configure unsolicited packets.
Product
ACS
NAT
Privilege
Security Administrator, Administrator
Command Modes
Exec > ACS Configuration
active-charging service service_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-acs)#
Syntax Description
nat unsolicited-pkts { icmp-host-unreachable { max-rate packets_num } | server-list { max-limit
servers_num } }
[ default | no ] nat unsolicited-pkts { icmp-host-unreachable | server-list }
servers_num } }
[ default | no ] nat unsolicited-pkts { icmp-host-unreachable | server-list }
default
Configures this command with its default setting.
Default: Disabled
no
Configures this command with its default setting.
icmp-host-unreachable max-rate packets_max
Configures the maximum number of allowed ICMP response packets, in seconds.
packets_max must be an integer from 1 through 100.
server-list max-limit servers_num
Configures the maximum number of servers to be stored per Session Manager instance.
servers_num must be an integer from 2 through 50.
Usage Guidelines
Use the following command to configure the number of allowed ICMP responses and the number of servers
where most number of unsolicited packets are received.
where most number of unsolicited packets are received.
Examples
The following command configures the number of allowed ICMP responses per second to 10:
Command Line Interface Reference, Modes A - B, StarOS Release 19
447
ACS Configuration Mode Commands
nat unsolicited-pkts