Cisco Cisco Packet Data Gateway (PDG)
nat binding-record
This command allows you to configure NAT Binding Record (NBR) generation.
This command is only available in StarOS 8.3. In StarOS 9.0 and later releases this command is available
in the Firewall-and-NAT Policy Configuration Mode.
in the Firewall-and-NAT Policy Configuration Mode.
Important
Product
NAT
Privilege
Security Administrator, Administrator
Command Modes
Exec > ACS Configuration > Rulebase Configuration
active-charging service service_name > rulebase rulebase_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-rule-base)#
Syntax Description
nat binding-record edr-format edr_format_name [ port-chunk-allocation ] [ port-chunk-release ] +
{ default | no } nat binding-record
{ default | no } nat binding-record
default
Configures this command with its default setting.
Default: port-chunk-release
no
If previously configured, deletes the configuration from the current rulebase.
edr-format edr_format_name
Specifies the EDR format.
edr_format_name must be the name of an EDR format, and must be an alphanumeric string of 1 through 63
characters.
characters.
port-chunk-allocation
Specifies generating NBR when a port chunk is allocated.
Command Line Interface Reference, Modes A - B, StarOS Release 19
691
ACS Rulebase Configuration Mode Commands
nat binding-record