Cisco Cisco Packet Data Gateway (PDG)
sgsn address
Configures the SGSNs that this GGSN service is allowed to communicate with.
Product
GGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > GGSN Service Configuration
configure > context context_name > ggsn-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ggsn-service)#
Syntax Description
sgsn address { { ipv4/ipv6_address | ipv4/ipv6_address/netmask } [ plmn-foreign [ reject-foreign-subscriber
] | mcc mcc_code mnc mnc_code [ reject-foreign-subscriber ] ] [ rat-type { GAN | GERAN | HSPA |
UTRAN | WLAN } ] [ description description ] [ disable-gtpc-echo
]
no sgsn address { ipv4/ipv6_address | ipv4/ipv6_address/netmask }
no
Removes a specific SGSN from the list or all configured SGSNs.
address
Configures the IP address of the SGSN.
ipv4/ipv6_address must be specified in IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal notation
and can be followed by the subnetmask of the address.
and can be followed by the subnetmask of the address.
plmn-foreign
Indicates whether or not the SGSN belongs to a foreign public land mobile network (PLMN).
reject-foreign-subscriber
Default: Disabled
Specifies that incoming calls from foreign subscribers are rejected.
mcc mcc_code
Specifies the mobile country code (MCC) portion of the PLMN's identifier.
Command Line Interface Reference, Modes G - H, StarOS Release 19
70
GGSN Service Configuration Mode Commands
sgsn address