Cisco Cisco Packet Data Gateway (PDG)
associate-dscp-template
Identifies a DSCP template to be associated with the GPRS service.
This command is used only in Releases 12.0 and 12.2. For Release 14.0 refer to the associate command.
Important
This command can be used before the associated DSCP template instance is created and configured but
care should be used to match the template names.
care should be used to match the template names.
Important
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > GPRS Service Configuration
configure > context context_name > gprs-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-gprs-service)#
Syntax Description
associate-dscp-template downlink template_name
no associate-dscp-template downlink
no associate-dscp-template downlink
no
Removes the template association definition from the configuration.
template_name
Specifies a unique DSCP template to associate with this GPRS service.
template_name must be a string of 1 to 64 alphanumeric characters with dots (.), dashes (-), and forward
slashes (/) but with no spaces.
slashes (/) but with no spaces.
Usage Guidelines
Use this command to associate DSCP templates with this GPRS service. A single template can be associated
with multiple GPRS services.
with multiple GPRS services.
Related commands:
Command Line Interface Reference, Modes G - H, StarOS Release 19
973
GPRS Service Configuration Mode Commands
associate-dscp-template