Cisco Cisco Packet Data Gateway (PDG)
gtpp echo-interval
Configures the frequency at which the system sends GTPP echo packets to configured CGFs.
Product
GGSN
P-GW
SAEGW
SGSN
S-GW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > GTPP Server Group Configuration
configure > context context_name > gtpp group group_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-gtpp-group)#
Syntax Description
gtpp echo-interval time
{ default | no } gtpp echo-interval
{ default | no } gtpp echo-interval
default
Resets the configuration to the default echo-interval of 60 seconds.
no
Disables the use of the echo protocol except for the scenarios described in the Usage section for this command.
time
Specifies the number of seconds for sending GTPP echo packets as an integer from 60 to 3600. Default: 60.
Usage Guidelines
The GTPP echo protocol is used by the system to ensure that it can communicate with configured CGFs. The
system initiates this protocol for each of the following scenarios:
system initiates this protocol for each of the following scenarios:
• Upon system boot
• Upon the configuration of a new CGF server on the system using the gtpp server command as described
in this chapter
Command Line Interface Reference, Modes G - H, StarOS Release 19
1147
GTPP Server Group Configuration Mode Commands
gtpp echo-interval