Cisco Cisco Packet Data Gateway (PDG)

gtpp trigger

Disables GTPP trigger conditions that cause either partial CDR record closure or opening of a new CDR
record container. GTPP Triggers are specified in 3GPP TS 32.251 v6.6.0. All GTPP trigger changes take
effect immediately, except volume-limit.

Product

ECS

GGSN

P-GW

SAEGW

SGSN

S-GW

Privilege

Security Administrator, Administrator

Command Modes

Exec > Global Configuration > Context Configuration > GTPP Server Group Configuration

configure > context context_name > gtpp group group_name

Entering the above command sequence results in the following prompt:

[

context_name

]

host_name

(config-gtpp-group)#

Syntax Description

gtpp trigger { apn-ambr-change [ default-bearer-only | all-non-gbr-bearers | all-bearers ] | cell-update

ms-timezone-change | plmn-id-change | qos-change | rat-change [ generate { cdr | container } ] |
routing-area-update | service-idle-out | serving-node-change-limit | sgsn-change-limit | tariff-time-change

| time-limit | uli-change | volume-limit }

default gtpp trigger
no gtpp trigger { apn-ambr-change [ default-bearer-only | all-non-gbr-bearers | all-bearers ] | cell-update

}

default

Sets the specified trigger condition back to the default setting. All trigger conditions are enabled by default.

Disables the specified trigger condition.

Command Line Interface Reference, Modes G - H, StarOS Release 19

1190

GTPP Server Group Configuration Mode Commands

gtpp trigger