Cisco Cisco Packet Data Gateway (PDG)
threshold asnpc-im-entry-denial
Configures the ASNPC Instant Messenger (IM) entry denial, alarm or alert thresholds.
Product
ASN-GW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]
host_name
(config)#
Syntax Description
threshold asnpc-im-entry-denial high_thresh [ clear low_thresh ]
high_thresh
Default: 0
Specifies the high threshold number of IM entry denials during session that must be met or exceeded within
the polling interval to generate an alert or alarm.
the polling interval to generate an alert or alarm.
high_thresh is an integer from 0 through 10000000. A value of 0 disables the threshold.
clear low_thresh
Default: 0
Specifies the low threshold number of IM entry denials during session that maintains a previously generated
alarm condition. If the number of session timeouts falls beneath the low threshold within the polling interval,
a clear alarm will be generated.
alarm condition. If the number of session timeouts falls beneath the low threshold within the polling interval,
a clear alarm will be generated.
low_thresh is an integer from 0 through 10000000. A value of 0 disables the threshold.
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm model,
the system assumes it is identical to the high threshold.
the system assumes it is identical to the high threshold.
Important
Usage Guidelines
Set the maximum number of IM session denials allowed in the ASNPC service.
Alerts or alarms are triggered for session timeouts based on the following rules:
Command Line Interface Reference, Modes G - H, StarOS Release 19
465
Global Configuration Mode Commands (T-threshold phspc)
threshold asnpc-im-entry-denial