Cisco Cisco Packet Data Gateway (PDG)
threshold total-lns-sessions
Configures alarm or alert thresholds for the total number of L2TP Network Server (LNS) sessions in the
system.
system.
Product
PDSN
GGSN
HA
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]
host_name
(config)#
Syntax Description
threshold total-lns-sessions high_thresh [ clear low_thresh ]
high_thresh
Default: 0
Specifies the high threshold number of total LNS sessions that must be met or exceeded within the polling
interval to generate an alert or alarm.
interval to generate an alert or alarm.
high_thresh is an integer from 0 through 4000000. A value of 0 disables the threshold.
clear low_thresh
Default: 0
Specifies the low threshold number of total LNS sessions that maintains a previously generated alarm condition.
If the number of LNS sessions falls beneath the low threshold within the polling interval, a clear alarm will
be generated.
If the number of LNS sessions falls beneath the low threshold within the polling interval, a clear alarm will
be generated.
low_thresh is an integer from 0 and 4000000. A value of 0 disables the threshold.
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm model,
the system assumes it is identical to the high threshold.
the system assumes it is identical to the high threshold.
Important
Command Line Interface Reference, Modes G - H, StarOS Release 19
936
Global Configuration Mode Commands (threshold ppp - url-blacklisting)
threshold total-lns-sessions