Cisco Cisco Packet Data Interworking Function (PDIF)
Each entry in the blacklist file should contain the ID type so that the validation is performed for that ID type.
In every entry, the ID type and ID value should be separated by a space. Only DOS and UNIX file formatting
are supported. For additional information, refer to the System Administration Guide.
In every entry, the ID type and ID value should be separated by a space. Only DOS and UNIX file formatting
are supported. For additional information, refer to the System Administration Guide.
Either a blacklist, a whitelist or none is configured. Both listing techniques cannot be used simultaneously
on the system.
on the system.
Important
Examples
The following command specifies the use of a crypto backlist file on the /flash drive:
crypto blacklist file /flash/pub/data/blacklist.txt
crypto blacklist file /flash/pub/data/blacklist.txt
Command Line Interface Reference, Modes G - H, StarOS Release 19
194
Global Configuration Mode Commands (A-K)
crypto blacklist file