Cisco Cisco Packet Data Interworking Function (PDIF)
radius authenticator-validation
This command enables (allows) or disables (prevents) the MD5 authentication of RADIUS users. By default
this feature is enabled.
this feature is enabled.
Product
PDSN
GGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ctx)#
Syntax Description
[ default | no ] radius authenticator-validation
default
Enables MD5 authentication validation for an Access-Request message to the AAA server.
no
Disables MD5 authentication validation for an Access-Request message to the AAA server.
Usage Guidelines
Use this command to disable, or re-enable, sending Access-Request messages to the AAA server for MD5
validation.
validation.
Examples
The following command disables MD5 authentication validation for Access-Request messages for user names
(NAI):
no radius authenticator-validation
(NAI):
no radius authenticator-validation
The following command enables MD5 authentication validation for Access-Request messages for user names
(NAI):
radius radius authenticator-validation
(NAI):
radius radius authenticator-validation
Command Line Interface Reference, Modes C - D, StarOS Release 19
889
Context Configuration Mode Commands N-R
radius authenticator-validation