Cisco Cisco Packet Data Gateway (PDG)
ipsec transform-set
Configures the IPSec transform set to be used for this crypto template payload.
Product
All Security Gateway products
Privilege
Security Administrator
Command Modes
Exec > Global Configuration > Context Configuration > Crypto Template Configuration > Crypto Template
IKEv2-Dynamic Payload Configuration
IKEv2-Dynamic Payload Configuration
configure > context context_name > crypto template template_name ikev2-dynamic > payload payload_name
match childsa match { any | ipv4 | ipv6 }
match childsa match { any | ipv4 | ipv6 }
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(cfg-crypto-tmpl-ikev2-tunnel-payload)#
Syntax Description
[ no ] ipsec transform-set list name [name2 ] [name3 ] [name4 ]
no
Specifies the IPSec transform set to be deleted. This is a space-separated list. From 1 to 4 transform sets can
be entered. name must be an alphanumeric string of 1 through 127 characters.
be entered. name must be an alphanumeric string of 1 through 127 characters.
name
Specifies the context configured IPSec transform set name to be used in the crypto template payload. This is
a space-separated list. From 1 to 4 transform sets can be entered. name must be an alphanumeric string of 1
through 127 characters.
a space-separated list. From 1 to 4 transform sets can be entered. name must be an alphanumeric string of 1
through 127 characters.
Usage Guidelines
Use this command to list the IPSec transform set(s) to use in this crypto template payload.
Examples
The following command configures IPSec transform sets named ipset1 and ipset2 to be used in this crypto
template payload:
ipsec transform-set list ipset1 ipset2
template payload:
ipsec transform-set list ipset1 ipset2
Command Line Interface Reference, Modes C - D, StarOS Release 19
1276
Crypto Template IKEv2-Dynamic Payload Configuration Mode Commands
ipsec transform-set