Cisco Cisco Packet Data Gateway (PDG)
gw-selection
Configures the parameters controlling the gateway selection process.
Product
MME
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-call-control-profile-
profile_name
)#
Syntax Description
[ remove ] gw-selection { co-location [ weight [ prefer { sgw | pgw } ] ] | pgw weight | sgw weight | topology
[ weight [ prefer { sgw | pgw } ] ] }
remove gw-selection
Deletes the gw-selection definition from the call control profile.
co-location [ weight [ prefer { sgw | pgw } ] ]
Selects "co-location" as the determining factor for gateway selection. Collocation should be configured for
both P-GW and S-GW selection for collocation to function. If a collocated PGW/SGW node cannot be found,
then topologically closest nodes are chosen next. Host names with both "topon" and "topoff" labels will be
considered in collocation.
both P-GW and S-GW selection for collocation to function. If a collocated PGW/SGW node cannot be found,
then topologically closest nodes are chosen next. Host names with both "topon" and "topoff" labels will be
considered in collocation.
weight: Enables weighted selection if there are multiple co-located pairs.
prefer { pgw | sgw}: Configures which weight to be used for weighted selection.
pgw weight
Selects PDN-Gateway as the determining factor for gateway selection.
sgw weight
Selects Serving Gateway as the determining factor for gateway selection.
Command Line Interface Reference, Modes C - D, StarOS Release 19
104
Call Control Profile Configuration Mode
gw-selection