Cisco Cisco Packet Data Gateway (PDG)
lro-selection-profile
Binds a CSCF last route profile with the peer server.
Product
SCM
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > CSCF Peer Servers Configuration > Server
Configuration
Configuration
configure > context context_name > cscf peer-servers server_name type { bgcf | ibcf | icscf | mgcf | mrcf
| pcscf | scscf | sip-as } > server server_name { address ip_address | domain domain_name )
| pcscf | scscf | sip-as } > server server_name { address ip_address | domain domain_name )
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-
server_name
-peer-server)#
Syntax Description
lro-selection-profile name profile_name
no lro-selection-profile
no lro-selection-profile
lro-selection-profile name profile_name
profile_name must be an existing CSCF last route profile and be from 1 to 79 alpha and/or numeric characters.
no lro-selection-profile
Removes CSCF last route profile from the peer server group.
Usage Guidelines
Use this command to identify a CSCF last route profile to use for finding the correct Public Safety Answering
Point (PSAP) during emergency calls.
Point (PSAP) during emergency calls.
Examples
The following command assigns a CSCF last route profile named lro1 to the peer server group:
lro-selection-profile name lro1
lro-selection-profile name lro1
The following command removes a CSCF last route profile from the peer server group:
no lro-selection-profile
no lro-selection-profile
Command Line Interface Reference, Modes C - D, StarOS Release 19
1428
CSCF Peer Server Monitoring Configuration Mode Commands
lro-selection-profile