Cisco Cisco Packet Data Gateway (PDG)
threshold
Enables thresholds alerting and configuration of thresholds for CSCF Service.
Product
SCM
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > CSCF Service Configuration
configure > context context_name > cscf service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-cscf-service)#
Syntax Description
threshold { { call-setup-failures | call-total-active | error-no-resource | error-presence | error-reg-auth
| error-tcp | invite-rcvd-rate | monitoring | reg-rcvd-rate | reg-total-active | route-failures } high_thresh
| error-tcp | invite-rcvd-rate | monitoring | reg-rcvd-rate | reg-total-active | route-failures } high_thresh
[ clear low_thresh ] | monitoring }
[ default | no ] threshold monitoring
default
Returns the command to the default settings.
no
Disables thresholds alerting for CSCF Service.
{ call-setup-failures | call-total-active | error-no-resource | error-presence | error-reg-auth | error-tcp |
invite-rcvd-rate | reg-rcvd-rate | reg-total-active | route-failures } high_thresh clear low_thresh
invite-rcvd-rate | reg-rcvd-rate | reg-total-active | route-failures } high_thresh clear low_thresh
call-setup-failures: Number of CSCF call setup failures.
Default: 0
call-total-active: Number of total active CSCF calls.
Default: 0
error-no-resource: Number of CSCF call setup failures due to no-resource.
Default: 0
error-presence: Number of CSCF Presence errors.
Default: 0
error-reg-auth: Number of CSCF Registration Authentication failures.
Command Line Interface Reference, Modes C - D, StarOS Release 19
1585
CSCF Service Configuration Mode Commands
threshold