Cisco Cisco Packet Data Gateway (PDG)
local-cause-code-mapping restricted-zone-code
Configures the reject cause code to send to a UE when a UE requests access to a restricted zone.
Product
MME
Privilege
Administrator
Command Modes
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-call-control-profile-
profile_name
)#
Syntax Description
local-cause-code-mapping restricted-zone-code emm-cause-code { eps-service-not-allowed-in-this-plmn
| no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-not-allowed-in-this-tracking-area |
tracking-area-not-allowed }
remove local-cause-code-mapping restricted-zone-code
remove local-cause-code-mapping restricted-zone-code
remove local-cause-code-mapping restricted-zone-code
Removes the configured cause code mapping.
restricted-zone-code emm-cause-code emm_cause_code
Specifies the EPS Mobility Management (EMM) cause code to return when a UE requests access to a restricted
zone.
zone.
emm_cause_code must be one of the following options:
• eps-service-not-allowed-in-this-plmn
• no-suitable-cell-in-tracking-area - Default.
• plmn-not-allowed
• roaming-not-allowed-in-this-tracking-area
• tracking-area-not-allowed
Command Line Interface Reference, Modes C - D, StarOS Release 19
147
Call Control Profile Configuration Mode
local-cause-code-mapping restricted-zone-code