Cisco Cisco Packet Data Gateway (PDG)

Pagina di 1952
redirect-url url
Redirects the subscriber to the specified URL.
url must be an alphanumeric string of 1 through 128 characters in the following format:
http://search.com/subtarg=#HTTP.URL#
terminate-flow
For TCP, gracefully terminates the connection between the subscriber and external server, and sends a TCP
FIN to the subscriber and a TCP RST to the server.
For WAP-Connection Oriented, the WSP session is gracefully terminated by sending WTP Aborts for each
of the outstanding requests, and WSP Disconnect to the client and the server. For WSP-Connectionless, only
the current WSP request is rejected.
Usage Guidelines
Use this command to set the actions on failure for server connection.
ICAP rating is enabled for retransmitted packets when the default ICAP failure action was taken on an ICAP
request for that flow. ICAP default failure action is taken on the pending ICAP request for a connection when
the connection needs to be reset and there is no other redundant connection available. For example, in the
ICAP request timeout and ICAP connection timeout scenarios, the retransmitted packet in the uplink direction
is sent for ICAP rating again.
For WAP CO, uplink retransmitted packets for the WAP transactions for which ICAP failure action was taken
will be sent for ICAP rating. The WSP header of the retransmitted packet is not parsed by the WSP analyzer.
The URL received in the previous packet for that transaction is used for ICAP rating. If failure action was
taken on multiple WTP transactions for the same flow (case: WTP concatenated GET request), the uplink
retransmitted packet for each of the transactions is sent for rating again.
For HTTP, uplink retransmitted packets for the HTTP flow on which ICAP failure action is taken are sent for
ICAP rating. The URL present in the current secondary session (last uplink request) is used for ICAP rating.
However, if there were multiple outstanding ICAP requests for the same flow (pipelined request), the
retransmitted packet for the URL sent for rating will be that of the last GET request.
Retransmission in various cases of failure-action taken on retransmitted packets when the ICAP response is
not received for the original request and the retransmitted request comes in:
• WSP CO:
◦Permit: The uplink packet is sent for ICAP rating and depending on the ICAP response the WTP
transaction is allowed/blocked. It is possible that the WAP gateway sends the response for the
permitted GET request. Hence, there is a race condition and the subscriber may be able to view
the web page even thought the rating was redirect or content insert.
◦Content Insert: The retransmitted packet is not sent for ICAP rating.
◦Redirect: The retransmitted packet is not sent for ICAP rating.
◦Discard: The uplink packet is sent for ICAP rating and depending on the ICAP response the WTP
transaction is allowed/blocked.
◦Terminate flow: The uplink packet is sent for ICAP rating and depending on the ICAP response
the WTP transaction is allowed or blocked. The WAP gateway may send an Abort transaction for
this GET request if the WSP disconnect packet sent while terminating the flow is received by the
WAP gateway.
   Command Line Interface Reference, Modes C - D, StarOS Release 19
460
Content Filtering Server Group Configuration Mode Commands
failure-action